SKU : LP1100D-24M

Switching Power Supply

AC to DC Switching Power Supply

LP1100D Series

Features

Green Power

• Standard/Din Rail Mounting Dual Purpose
• Easy mounting (one-step installation)
• No-load Consumption is lower than 0.5W (No Display)
• Comply with high Efficiency Power 80Plus Criterion
• Comply with 2010. Energy Conservation Power Erp Regulation
• "Output Voltage Monitor" Display (Optional)
• Convection cooled high reliability
• 100% burn-in test
• 1 years warranty
• Output modify range: 3V~200VDC

DIMENSIONS : 100(H)*83(D)*49(W)mm WEIGHTS : 365g

General Specifications

INPUT

Input range 90~132/180~264VAC (Selectable) 220~380VDC

Input frequency 47~63Hz

Inrush current (25 ํC) 20A/110VAC 40A/220VAC

OUTPUT

Hold-up time 13ms

Short protection Autorecovery

Over load protection Automatic power limited

Optional 5V/3A AUX output

for models which output voltage lower than 40VDC

Detail specifications

100 Watts

CE Standards

EN 55032, EN 55024, EN61000-3-3, (EN 6100-4-2, EN 6100-4-3, EN 6100-4-4, EN 6100-4-5, EN 6100-4-6, EN 6100-4-8, EN 6100-4-11)

LVD : EN60950-1

Safety Standards

UL 508 APPROVAL

CE Marking

Environments

Operating Temperature -15~50 ํC, Ambient

Operating Humidity 20~90% RH, No Condensing

Storage Temperature -20~85 ํC, Ambient

Vibration 2G, 10~500Hz, 3 axes

Note

1. Each output can provide up to maximum load, but total load can not exceed rated output power.

2. Line regulation is measured from low line to high line at rated load.

3. Load regulation is measured from 20% to 100% of rated load at 220VAC input.

4. Ripple & Noise are measured with 20MHz oscilloscope at 220VAC by using a 20cm long 12" twisted pair-wire with a 0.1uF/630V metal capacitor & a 47uf electrolytic capacitor parallel on the test point.

5. Efficiency is measured at rated load and 220VAC input.

6. Hold-up time is measured at rated load and 220VAC input.

7. With • are CE safety approval, but no UL safety approval.

8. Output Voltage monitor display models. no-load power consumption of 1.5W. and no Energy Conservation Power Erp Regulation.

9. Output Voltage Adjustable is measured on 5% of rated load.

10. Reign Power reserve the right to change specifications at any time without notice.