KSR/KNR Series Single Axis Robots
| KSR/KNR Series Single Axis Robots | ||||||
| Model Selector | ||||||
 |
||||||
| Series: | KSR-30 | KSR-40 | KSR-60 | KSR-86 | KSR-100 | |
| Lead: | 01mm | |||||
| Positioning Reproducibility: | Common+0.004m | Precision ±0.003mm | ||||
| Keyway: | Shaft end with keyway | None | ||||
| Track Length: | 100mm | 150mm | 200mm | |||
| Type: | Standard Type | Light Load Type | ||||
| Slide Number: | 1 | |||||
| Motor Direction: | Motor External Direct Connection | Motor External Under | + Below |
Motor External Above | Motor External Right Side | Motor External Left Side |
| Reference Flange Page: | F0 | |||||
| Limit Switches: | Limit Orbit | 671 Photoelectric support | 674 Photoelectric | + Photoelectric support | GX-F12A Type |
GX-F12A-P Type |
| Photoelectric Mode: | NPN x3 pcs | PNP x3 pcs | None | |||
| Couplings: | Couplings | None | ||||
| Model: | TPA-?-??-?-???-?-??-?-? | |||||
|
PRODUCT DETAIL |
KSR-30 |
KSR-40 |
KSR-50 |
KSR-60 |
KSR-86 |
KSR-100 |
| The single axis robot KK Series, developed by TPA ROBOT, uses partially hardened U-shaped steel base track to significantly increase the robot’s strength and load capacity. Due to the different environments, we have three type of linear robot series, KSR, KNR and KFR, depending on the type of cover used.
For the return system between the track and the slider, the contact surface between the ball and the ball groove adopts a 2-row Goethe tooth design with a contact angle of 45 degrees, which can make axis robot arm bear equal load capacity in four directions. At the same time, the high-precision ball screw is used as the transmission structure, and the U-shaped track cooperates with the optimized design, so that KK axis robot has unparalleled precision, and its repeated positioning accuracy can reach ±0.003mm. Under the same load conditions, our single axis robot KK Series is smaller in size, we provide standard threaded holes on the steel base and slider, and our motor adapter plate can provide up to 8 motor installation methods, which means it can be easily assembled any cartesian robotic system. Therefore, KK series single axis robots are widely used in silicon wafer handling, automatic dispensing, FPD industry, medical automation industry, precision measuring instruments, sliding table, linear slide table coordination industry. |
||||||
